Reconnect Power/Cable!
Operation : Read Flash [ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
BREAK : Device not found!
HINT : Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Read Flash [ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 810 [MSM8994]
ID_BLOCK_S : 01C2E7CA
ID_BLOCK_L : DF2943BB1A808DB867DC3419E6BD3515
ID_BLOCK_L : 99F45AF5E669D15277460BC0C22D3B00
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8994 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00008000/00008000/00001000/00001000/00000200
Boot Ok!
Brand : Gigaset
ProdName : ME
ProdModel : GS55-6
Device : ME
AndroidVer: 5.1.1
Manufact. : Gigaset
QLMxCPU : MSM8994
DevInfo : MSM8994__Gigaset__Gigaset__ANDR_v5.1.1__GS55-6__ME__ME
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : btfm.mbn
[Read Ok] : pmic.bin
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : fs_gc.img
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : tz.mbn
[Read Ok] : rpm.mbn
[Read Ok] : hyp.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8994 / eMMC
Firmware Size : 2730 MiB
Done!
Elapsed: 00:04:42
Reconnect Power/Cable!
